#Adobe golive frames problems mac os x#
#Adobe golive frames problems full#
#Adobe golive frames problems series#

Two assembly problems have caused some delay in the project schedule:ĭuring the adjustment on the coil of the upper bandage, it wasdetermined that the existing bandage design required redesign using strengthened fiberglass parts. In the next step they will be tested by a high voltage. The current leads were connected with insulators and then impregnated with epoxy resin and cured. It was replaced for a new one, which was thermal cycled and then leak tested. One current lead insulator appeared to be leaking. The inner cryostat cylinder has been rolled and welded and special tools are being utilized to adjust it to the precise dimensions that the design requires. The cryostat top and bottom have been fully welded and polished, and are ready for assembly. The nitrogen support ring has been fully assembled, welded, polished, and tested for leaks. The helium vessel bottom, outer cylinder, and mushroom bottom with all coil and transport supports have been assembled and welded. Two stacks of the laminated metal supports that provide low heat-leak supports for the helium vessel were successfully tested at MIT to determine their compression load versus deflection characteristic.īoth the nitrogen cans and copper section of the cryostat shield have been fully polished. As a result of these tests, the inlet and outlet F-coil bayonets were ordered for manufacturing.

(The o-ring seals were designed to work and were tested in both the surrounding atmosphere and in vacuum.) The guard tube vacuum seal was also successfully tested. The tests with the bayonet, plug, and transfer line while transferring LN2 and liquid helium demonstrated reliable operation and yielded necessary temperature data on the o-ring seals. Intensive additional tests of the bayonet inlet into a test cryostat were completed at MIT. The vender has agreed to remake the transfer line upon mutual technical solution of the problem with MIT. The rod assemblies were tested at MIT, and the rod assemblies are now ready to be installed into the cryostat.Īn additional set of tests of the helium transfer line (made by Quality Cryogenics) demonstrated an unacceptable high heat leak. Darren Garnier made several trips to oversee these activities.Ībility completed the second heads for the Inconel rods of the anti-rotation devices. Work continues on the final setting of the glass ball supports for the lead shield. The space frame was also fitted into the vacuum shell and checked for tightness. These included careful assembly, measurement, and shimming of the Helium pressure vessel into the space frame using dummy supports. This should temporarily eliminate the screen artifact.Work towards the 'final fitup' milestone for the floating coil cryostat is proceeding at Ability Engineering, South Holland, IL. I work in In-Design most of the time.'Īs noted by Bill, a kludgy workaround for this issue is to shift views between alternating options, then back to the original view. Didn't think much about it - just shifted the view back and forth.

#Adobe golive frames problems mac os x#

Meanwhile, some readers continue to note that the problem only occurred after updating to Mac OS X 10.4.5. I only see this in the Adobe applications and it occurs on both my MDD Dual 1Ghz PowerMac and my 1Ghz 15' PowerBook so I can't attribute it to a specific video card.' The worst offender in my case is GoLive and this has been the case in both CS1 and CS2 and from 10.4.3 on. 'I have been experiencing the same type of screen redraw issues with nearly all Adobe apps, but it is not related to 10.4.5 as I am still on 10.4.4. It is as though the screen redraw is lazy and redrawing only that part of the screen occupied by the more recently typed letters, which do not extend down so far.'

#Adobe golive frames problems full#

The smear is not the full height of the letter, but only the bottom-most part. 'If, for instance, I have a paragraph set to 'centered' format and type a letter with a descender, (i.e., 'y'), as I continue to type, a 'smear' extends across the page as the letter is pushed sideways. 'I have been seeing the screen redraw issue in GoLive CS (1) under 10.4.3. The most acutely affected appear to be Illustrator and GoLive. It now appears that there is a more widespread problem affecting several Adobe applications under various iterations of Mac OS X 10.4.x.

#Adobe golive frames problems series#

We previously covered a series of Adobe application screen redraw issues initially associated with the Mac OS X 10.4.5 update.